Christmas Crafts for Adults

When the holiday season rolls around, it’s the perfect time to explore the joy of creating Christmas crafts for adults. Whether you’re a seasoned crafter or just looking for a new way to celebrate the festive spirit, Christmas crafts for adults offer endless opportunities to make unique decorations, heartfelt gifts, and personalized home decor. From elegant wreaths to DIY ornaments, crafting during Christmas is not just a hobby but a wonderful way to bond with loved ones or enjoy some creative solitude.

Pin This Now to Remember It Later

Pin This

Engaging in Christmas crafts for adults isn’t just about making something beautiful—it’s about embracing the holiday spirit in your own special way. With so many options for adult Christmas crafts, you can experiment with intricate designs, modern aesthetics, or even upcycle materials for eco-friendly creations. These projects are tailored to adult skill levels, making them both fun and fulfilling. From rustic-themed crafts to sophisticated table settings, there’s a project for everyone, no matter your style or experience.

Looking for inspiration for your Christmas crafts for adults? This guide is packed with ideas to spark your creativity. Dive into projects that transform simple supplies into stunning masterpieces. Discover step-by-step instructions, tips, and tricks to make your crafting process smooth and enjoyable. Whether you’re decorating your home, making handmade gifts, or just indulging in a relaxing holiday activity, our collection of adult Christmas crafts will make this season extra special.

Christmas Crafts for Adults

51. Snow Globe Mason Jar

Materials:

• Mason jar with lid
• Small bottle brush tree
• Miniature car (e.g., Volkswagen Beetle or any car with or without open windows)
• Baker’s twine
• Faux snow
• Jingle bells
• Tape
• Wire cutters

Instructions:

1. Use wire cutters to remove the bottom plastic piece of the bottle brush tree.
2. If the car has closed windows:
   • Tape one end of the twine to the bottom of the car.
   • Wrap the twine twice around the car to secure the tree on top.
3. If the car has open windows:
   • Thread the twine through the windows and tie a knot on top to secure the tree.
4. Add a layer of faux snow to the bottom of the mason jar.
5. Place the car with the tree tied on top into the mason jar.
6. Wrap twine around the mason jar lid and tie on some jingle bells.
7. Close the jar with the lid. Your snow globe mason jar is complete!

Get the tutorial (with detailed steps and images)

50. Mason Jar Votive

Materials

• Quart or pint-sized mason jars (smooth-sided)
• Red chalky paint
• Green chalky paint
• Painter’s tape
• Christmas tree stencil (downloadable)
• Scissors
• Paintbrush
• Epsom salt
• White jingle bells
• Baker’s twine
• Tea lights

Instructions

1. Prepare the Base
   • Overlap three pieces of painter’s tape on the bottom side of the mason jar. Seal the edges tightly.
2. Create the Stencil
   • Print and cut out a Christmas tree shape from a stencil.
   • Trace the shape onto the painter’s tape.
   • Cut out the Christmas tree shape from the tape.
3. Apply the Stencil
   • Stick the painter’s tape tree shape onto the mason jar.
   • Use a credit card to press and seal the edges tightly to prevent paint bleeding.
4. Paint the Jars
   • Apply two coats of chalky finish paint (red or green) to the jars. Let each coat dry.
   • Optional: Use acrylic craft paint, though it may result in a streakier finish.
5. Remove the Stencil
   • Once the paint is dry, carefully remove the tape. Touch up any imperfections if needed.
6. Add Final Touches
   • Fill the jars with Epsom salt.
   • Place a tea light inside.
   • Tie white jingle bells with baker’s twine around the jar for decoration.
7. Display and Enjoy
   • Light the tea light and enjoy your Christmas tree mason jar votive!

Get the tutorial (with detailed steps and images)

49. Snowflake Mason Jars

Materials

• Smooth-sided mason jars (pint and quart sizes)
• Snowflake stamp (available at craft stores or online)
• Paint:
  • Chalking paint (for jar surface)
  • White craft paint (for snowflakes)
• Paintbrush
• Paper plate

Instructions

1. Paint the Jars
   • Apply two coats of chalking paint to the mason jars. Let each coat dry completely.
2. Distress the Jars
   • Lightly distress the rim and any embossed lettering on the jar (e.g., Ball logo) for a rustic look.
3. Stamp Snowflakes
   • Dip the snowflake stamp in white craft paint.
   • Dab the stamp lightly on a paper plate to remove excess paint.
   • Press the stamp straight onto the jar without rolling.
   • Repeat the process, reapplying paint as needed (one dip can create up to two snowflakes).
4. Add Dots
   • Use a paintbrush to add small decorative dots around the jar for additional detail.
5. Finish
   • Allow the jar to dry completely. Your snowflake mason jar is now ready!

Get the tutorial (with detailed steps and images)

48. Township Candle

Materials Needed:

• Glass jar
• DecoArt Americana acrylic paint – Lamp Black
• Small round paint brushes (sizes 2 and 4)
• 1/4” flat brush
• Can of Santa Snow
• Wire for handle (optional)
• Isopropyl alcohol spray
• Clean cloth
• Soapy water
• Scrap piece of paper
• Cello tape
• Old cardboard box
• Tea light candles
• Epsom salts (optional)

Instructions:

• Prepare the Jar:
  1. Wash the jar with soapy water and remove any labels.
  2. Spray the outside of the jar with isopropyl alcohol and wipe clean to remove residue. Avoid handling the jar excessively.
• Create the Template: 3. Measure the inside of the jar using a scrap piece of paper. Cut the template to fit and secure it inside the jar with cello tape.
• Paint the Design: 4. Place the jar on a soft cloth (e.g., an old tea towel). Using a small round brush and black paint, follow the template to paint the design. Add additional elements like trees or fences as desired.
  5. Let the first coat dry (it will be patchy). Apply a second coat for full coverage and allow it to dry completely.
• Add a Wire Handle (Optional): 6. If you want a handle, attach the wire to the jar now.
• Spray with Santa Snow: 7. Place the jar in an old cardboard box. Lightly spray the top third of the jar with Santa Snow, avoiding the inside. Let it dry.
• Add Finishing Touches: 8. Optionally, sprinkle Epsom salts on the top of the jar for added effect.
• Insert Candles: 9. Add tea light candles inside the jar. Use multiple candles for larger jars.

Get the tutorial (with detailed steps and images)

47. Snowy Mason Jar

Materials:

• Mason jars
• Tacky glue or decoupage glue
• Epsom salt (1 cup per batch)
• Glitter (1 tablespoon per batch)
• Faux greenery (or fresh greenery)
• Twine
• Hot glue
• Disposable plate or bowl
• Newspaper or wax paper
• Flickering tea lights

Instructions:

1. Prepare the Snow Mixture:
   • Mix 1 cup of Epsom salt with 1 tablespoon of glitter in a disposable plate or bowl.
2. Apply Glue to the Jar:
   • Coat the outside of a mason jar with a thin layer of glue. Avoid applying too much to prevent dripping.
3. Add Snow Effect:
   • Sprinkle the glittered Epsom salt mixture over the jar, ensuring even coverage.
   • Place the jar on a cleanable surface (newspaper, wax paper, etc.) to catch any drips.
4. Dry the Jar:
   • Allow the jar to dry for several hours or preferably overnight.
5. Decorate the Jar:
   • Cut a small piece of faux greenery (or fresh greenery) and attach it to the top of the jar using a dot of hot glue.
   • Wrap twine around the mouth of the jar a few times and tie it off with a bow.
6. Add a Light:
   • Place a flickering tea light inside the jar to create a luminary for holiday decor.

Get the tutorial (with detailed steps and images)

46. Bell Mason Jar Candle Holder Craft for Adults

Materials:

• Mason jar
• Adhesive Label sheet
• Red acrylic paint
• Gold adhesive sheet
• Candle
• Dried beans (optional, for filling)

Instructions:

1. Cut the solid bell shape from the Adhesive Label sheet.
2. Clean the mason jar thoroughly and apply the bell label to the front of the jar.
3. Paint the entire jar with red acrylic paint and let it dry.
4. Cut the bell outline from the Gold Adhesive sheet and place it over the painted bell shape on the jar.
5. Fill the jar with dried beans and place a candle on top.
6. Create a tag for gifting if desired.

Get the tutorial (with detailed steps and images)

45. Gingerbread Man Painted Jar

Materials

• Glass jar with lid (clean and dry, can be repurposed from the recycle bin or candle jars)
• Contact paper
• Cookie cutter (any shape: gingerbread man, candy cane, star, Christmas tree) or a printed design
• Spray paint (color of your choice)
• White acrylic paint pen (extra fine tip)

Instructions

• Choose a cookie cutter or print an outline of your desired design (e.g., Christmas-themed shapes).
• Trace the outline onto contact paper and cut it out carefully.
• Stick the contact paper design onto the clean glass jar, ensuring it is centered and straight.
• With the jar lid on, spray paint the jar in light coats, allowing each coat to dry before applying the next. Hold the spray can at a distance to avoid drips.
• Once the paint is dry, carefully peel off the contact paper to reveal the design.
• Use the white acrylic paint pen to add decorative details, such as outlines or dots around the edges of the design and lid.
• Fill the jar with candy or cookies for a festive and inexpensive gift.

Get the tutorial (with detailed steps and images)

44. Chalky Painted Mason Jars

Materials:

• Paint: Americana Décor Chalky Finish paint in Everlasting (white) and Romance (red).
• Finish: Crème Wax for sealing and buffing.
• Mason Jars: Ball jars (small and large half-gallon size).
• Painter’s Tape: Scotch Blue delicate surface tape.
• Sandpaper: Medium-fine sandpaper or sanding block.
• Brushes: Paintbrushes suitable for detailed and smooth application.

Instructions:

1. Prepare Mason Jars:
   • Clean and dry the jars thoroughly before painting.
2. Paint the Jars:
   • Apply 2-3 coats of chalky finish paint, letting each coat dry for 20-30 minutes.
   • Ensure even coverage and allow the paint to dry completely.
3. Distress the Jars (Optional):
   • Use medium-fine sandpaper or a sanding block to gently sand areas for a distressed, vintage look.
   • Focus on raised details like the Ball label for a unique effect.
4. Paint Stripes on Large Jar (Optional):
   • After painting the jar white, tape off stripes with Scotch Blue painter’s tape designed for delicate surfaces.
   • Paint the exposed areas with red paint.
   • Carefully remove the tape and touch up any imperfections if necessary.
5. Finish the Jars:
   • Apply crème wax to seal the paint.
   • Buff the jars to achieve a matte finish.
6. Decorate and Use:
   • Add candles or other decorations to the jars.
   • Use as a centerpiece, mantel décor, or gifts for special occasions.

Get the tutorial (with detailed steps and images)

43. Treat Jars

Materials Needed:

• Jars (craft store jars or baby food jars)
• Glitter: red, white, and brown
• Googly eyes
• Red pom-pom
• Black ribbon
• Silver foam sheet
• Black beads
• Orange paper
• Decoupage
• Hot glue
• Brown pipe cleaner

Instructions:

General Steps:

1. Cover the jar with a layer of decoupage.
2. Sprinkle glitter over the jar to fully cover it. Set aside to dry.

Santa Belt Mason Jar:

• Use red glitter for the jar.
• Wrap a piece of black ribbon around the jar and secure it with hot glue.
• Cut a square slightly larger than the ribbon from the silver foam sheet, then cut out its center to create a belt buckle.
• Hot glue the belt buckle onto the ribbon.
• Fill the jar with candy.

Snowman Mason Jar:

• Use white glitter for the jar.
• Glue two small googly eyes onto the jar.
• Cut a small carrot shape from orange paper and glue it in place as the nose.
• Attach small black beads in a curved line to form a smiling mouth.

Reindeer Mason Jar:

• Use brown glitter for the jar.
• Glue two googly eyes onto the jar.
• Add a red pom-pom as the nose.
• Cut one brown pipe cleaner in half and snip off 1–2 inches to wrap around the remaining piece to shape it into an antler.
• Hot glue the antlers to the jar lid.

Get the tutorial (with detailed steps and images)

42. Candy Cane Mason Jar

Materials Needed:

• Red mason jar
• Mod Podge
• Blue painter’s tape
• White paint
• Small paintbrush
• Twine
• Silver and red jingle bells

Instructions:

1. Start with a red mason jar.
2. Use painter’s tape to create diagonal stripes on the jar, spacing them approximately two inches apart.
3. Apply a layer of Mod Podge to the exposed areas of the jar to ensure a bright white finish.
4. Once the Mod Podge has dried, paint over the exposed areas with white paint.
5. Allow the paint to dry completely, then carefully remove the painter’s tape.
6. Decorate the top of the jar by wrapping twine around it and attaching silver and red jingle bells for a festive touch.

Get the tutorial (with detailed steps and images)

41. Santa Painted Mason Jar

Materials

• Black Satin Ribbon
• Gold Metallic Ribbon
• Red and White Striped Ribbon
• Foam Brush
• Red Paint
• Black Paint
• Mason Jar with Lid
• Black Buttons
• Glue Gun

Instructions

• Paint the Jar:
  • Apply two coats of red paint to the outside of the mason jar, letting it dry between coats.
  • Paint the jar rim red after the body dries.
• Paint the Lid:
  • Paint both lid pieces black. Visible brush strokes or areas showing through are okay.
• Decorate the Lid:
  • Hot glue ribbon around the lid. If the ribbon is too narrow, layer it in two sections.
  • Tie a bow with red and white striped ribbon and glue it over the seam.
• Create the Belt:
  • Measure and cut a piece of black satin ribbon to fit around the jar.
  • Glue the ribbon to the jar’s front, ensuring it is centered. Wrap the ribbon around the jar, gluing in a few spots, and secure it at the back.
• Make Santa’s Buckle:
  • Cut a rectangle from the gold ribbon and glue it to the center of the black satin ribbon on the jar.
  • Cut a smaller rectangle from black satin ribbon to fit inside the gold rectangle, leaving a gold border. Glue it in place.
• Add Buttons:
  • Glue two black buttons vertically on the front of the jar.
• Finishing Touch:
  • Fill the jar with festive treats like peppermints and gift it to someone special!

Get the tutorial (with detailed steps and images)

40. Magical Lantern Tutorial

Materials

• Jars: Different sizes and shapes (e.g., canning jars, pickle jars, spice jars).
• Spray Paint: A can of blue spray paint (e.g., Rust-Oleum Brilliant Blue Spray Paint).
• Paint Marker: Uchida Deco Color Fine Point Paint Marker (optional).
• Alternative Design Materials: Cardstock or transparent printable vinyl.

Instructions

1. Prepare the Jars:
   • Wash jars thoroughly to remove any oily residue that could affect paint adhesion.
2. Paint the Jars:
   • Spray paint the outside of the jars with a thin, even layer to keep them translucent.
   • Allow the paint to dry. Test light diffusion by placing a candle inside.
   • Apply additional layers if necessary.
3. Design the Lanterns (choose one method):
   • Draw:
     • Print a design and insert it inside the jar for tracing.
     • Use paint markers (e.g., Uchida Deco Color) for outlines and coloring. Let the first layer dry before touching up.
   • Paint:
     • Mix white Elmer’s glue with black acrylic paint for a glass-painting mixture.
     • Insert a printed design inside the jar and paint on the outside using a small brush.
   • Cut and Glue:
     • Print the design, cut it out, and glue it onto the sprayed jars.
     • Use cutting machines like Silhouette or Cricut for intricate designs.
   • Print on Vinyl:
     • Print designs on vinyl and adhere them to the jar’s exterior.
4. Add Candles:
   • Place candles inside the jars to illuminate the designs.

Get the tutorial (with detailed steps and images)

39. Mod Podge Glitter Candle Gift

Materials Needed:

• Ashland Jar Candle
• Recollections Glass Glitter
• Mod Podge Matte
• Foam Brush
• Paper Plate
• Celebrate It Satin Ribbon (Pewter)
• Wood Snowflake Ornament
• Scissors

Instructions:

1. Prepare Glitter:
   • Pour a generous amount of glitter onto a paper plate. Spread it to cover the bottom.
2. Apply Mod Podge:
   • Use a foam brush to paint one side of the jar with a coat of Mod Podge.
3. Add Glitter:
   • Roll the painted side of the jar in the glitter on the plate. Let it dry.
   • Repeat the process for the other side of the jar.
4. Decorate the Jar:
   • Tie a ribbon around the neck of the jar.
   • Thread the wood snowflake ornament onto the ribbon.
   • Tie a bow to secure the ornament.

Get the tutorial (with detailed steps and images)

38. Popsicle Stick Sleds

Materials

• Popsicle sticks: 2 regular-sized and 5 small per sled
• Wood glue
• Wood stain
• Paint
• Twine
• Glue dots
• Optional embellishments: Jingle bells, faux flocked greenery, baker’s twine

Instructions

1. Prepare the base:
   • Glue 4 small craft sticks together, staggering the end sticks slightly lower on each side.
   • Use a toothpick or skewer to apply glue for precision.
   • Allow the base to dry.
2. Paint and stain:
   • Paint the small craft sticks in your desired color and let them dry.
   • Stain the regular-sized craft sticks using a rag.
3. Assemble the sled:
   • Glue the stained regular craft sticks (sled runners) to the painted small craft stick base using a skewer or toothpick for easy glue application.
   • Attach a cross stick at the front of the sled.
4. Add embellishments (optional):
   • Decorate with faux greenery, jingle bells, or baker’s twine.
   • Wrap the greenery and bells in baker’s twine, then tie it around the crossbar.
   • Personalize the sled by writing a name, date, or attaching a small photo.
5. Attach twine hanger:
   • Cut twine to the desired length.
   • Attach it to the underside of the crossbar using glue dots or craft glue. Glue dots are recommended for less mess and easier application.

Get the tutorial (with detailed steps and images)

37. Mercury Glass Ornaments

Get the tutorial (with detailed steps and images)

36. Felt Coffee Cup Ornament

Materials

• Clear glass ornaments
• Krylon Looking Glass spray paint
• Hairdryer
• Water spray bottle
• Q-tips (optional)
• Gold paint (optional)
• Krylon Oil Rubbed Bronze spray paint (for ornament tops)

Instructions

• Step 1: Spray the inside of the ornament with Krylon Looking Glass spray paint. Ensure the reflective side shows through the glass.
• Step 2: Swirl the paint around inside the ornament. Note that the paint is thin and may pool at the bottom.
• Step 3: Use a hairdryer to blow-dry the inside of the ornament while swirling it. Do this for 10-20 seconds until the paint is almost dry but not completely.
• Step 4: Mist the inside of the ornament with water to create large droplets. Shake the ornament gently to distribute the droplets.
• Step 5 (Optional): Rub the inside of the ornament with a Q-tip to remove some paint for a more distressed look.
• Step 6 (Optional): Add one drop of gold paint inside the ornament for an antique effect. Mist with water, swirl the ornament, and dry with a hairdryer.
• Step 7: Paint the metal tops with Krylon Oil Rubbed Bronze spray paint for a vintage look.

Get the tutorial (with detailed steps and images)

35. DIY Glitter Believe Ornaments

Materials

• Clear plastic or glass ornaments (with removable caps)
• Minwax Polycrylic
• Squirt bottles
• Glitter (various colors and types)
• Paper plate
• Vinyl (shiny or printable silver foil)
• Transfer paper
• Silhouette® Cameo (or similar cutting tool, optional)
• Silver cording
• Red shiny jingle bells

Instructions

1. Prepare the Ornaments
   • Remove the caps from the clear ornaments.
2. Add Polycrylic
   • Fill squirt bottles with Minwax Polycrylic.
   • Squirt a few drops into the ornament and roll it around to coat the inside. Cover the entire ornament or just partway, depending on your preference.
   • Ensure only a small amount of Polycrylic is used.
3. Add Glitter
   • Pour glitter into the ornament.
   • Cover the opening with your thumb and shake the ornament to distribute the glitter.
   • Dump excess glitter onto a paper plate.
4. Decorate with Vinyl (Optional)
   • Use a cutting tool like Silhouette® Cameo to cut words or shapes from shiny vinyl or printable silver foil.
   • Apply the vinyl design to the ornament using transfer paper.
5. Add Embellishments
   • Tie two red jingle bells to the neck of the ornament using silver cording.
6. Customize Further
   • Experiment with different glitter styles, such as flaky white and silver glitter or solid red glitter.
   • Use creative fonts or designs for vinyl shapes to make each ornament unique.

Get the tutorial (with detailed steps and images)

34. Mini Yarn Hats Ornaments

Materials:

• Paper rolls (e.g., toilet paper rolls, kitchen towel rolls)
• Yarn in assorted colors (affordable options are suitable; consider color-changing or magical yarn for variety)
• Scissors
• Tissue paper

Instructions:

1. Prepare the Yarn:
   • Cut yarn into equal-length threads.
   • Determine the length based on the width of your paper roll. Test with one thread to find the ideal size.
2. Prepare the Paper Roll:
   • Cut the paper roll into a thin ring.
3. Attach the Yarn:
   • Fold a yarn thread in half.
   • Push the looped side of the thread through the paper roll.
   • Pull the loose ends of the thread over the paper roll and through the loop. Tighten to create a knot.
   • Repeat this process until the entire ring is covered with yarn.
4. Shape the Hat:
   • Push all the yarn threads through the center of the paper roll. Twisting the threads can make this easier.
5. Add Tissue Paper:
   • Roll a small ball of tissue paper.
   • Insert it into the paper roll to form the hat shape and stabilize the yarn.
6. Finish the Hat:
   • Tie a knot around the gathered threads above the paper roll to form the top of the hat.
   • Trim the excess yarn to create a neat pom-pom.

Get the tutorial (with detailed steps and images)

33. Rustic Scrap Wood Ornaments

Tools

• Saw
• Drill
• Large and small paintbrush

Supplies

• Scrap wood dowels or 3/4-inch wood square dowels
• Flat white latex paint
• Stencil (made with Silhouette Cameo or hand-drawn)
• Red acrylic paint
• Jute
• Bells
• Sandpaper
• Optional: Black latex paint (for weathered effect)

Instructions

1. Cut and Drill
   • Cut wood into 6-inch pieces.
   • Drill a hole at one end large enough for the jute to fit through.
   • If you don’t have a saw, ask your hardware store for assistance.
2. Paint Base
   • Paint the wood pieces with flat white latex paint and let them dry.
3. Create and Apply Stencil
   • Use a Silhouette Cameo or hand-draw/tracing method to create stencils.
   • Apply the stencil to the painted wood and paint letters/designs using red acrylic paint.
4. Sand and Optional Aging Effect
   • Remove the stencil and sand the edges lightly for a distressed look.
   • Optional: Mix 1 part black latex paint with 4 parts water. Apply the mixture and wipe it off after a few seconds to darken sanded areas.
5. Add Embellishments
   • Thread jute through the drilled hole and attach small silver bells.
   • Use a small nail to help push the jute through the bell hooks if needed.
6. Hang on the Tree
   • Your ornaments are ready to hang and enjoy!

Get the tutorial (with detailed steps and images)

32. Jenga Ornaments

Materials

• Dollar Tree Tumbling Tower Game (or Jenga game pieces)
• Waverly chalk paint in moss and crimson
• Americana Gel Stain in oak (or any wood stain)
• Paint brushes
• Hot glue gun and glue sticks
• Wood glue
• Thin ribbon
• Scissors
• Printable graphics on white cardstock (download from thecrazycraftlady.com/jenga-christmas-ornaments)

Instructions

• Paint or Stain Pieces
  Paint or stain the Jenga pieces and set them aside to dry.
  Tip: Use parchment paper to prevent sticking while drying.
• Assemble the Frame
  1. Glue Jenga pieces together into a frame shape.
  2. Add wood glue for a strong hold and hot glue for quick setting.
  3. First, glue two pieces into an L-shape. Repeat to create a second L-shape.
  4. Glue the two L-shapes together to form a complete frame.
• Prepare the Graphic
  Print the graphics and trim them to size, cutting just inside the square outline.
• Add the Ribbon Loop
  1. Cut a length of ribbon.
  2. Tie the ends together to form a loop.
  3. Hot glue the ribbon knot to the top back edge of the frame.
• Attach the Graphic
  1. Line the back perimeter of the frame with hot glue.
  2. Place the trimmed paper graphic over the glue and smooth it down.

Get the tutorial (with detailed steps and images)

31. Mason Jar Lid Ornaments

Materials

• Mason jar lid insert and screw ring (available in the canning section of stores)
• Fabric scraps (e.g., flannel, approximately 15″ x 4″ or less)
• Glue gun
• Scissors
• Twine
• Christmas-themed image, cutout, or sticker for decoration

Instructions

1. Prepare the Lid Insert:
   • Wrap the fabric around the mason jar lid insert (not the screw ring).
   • Use hot glue to secure the fabric in the center of the lid. Be cautious to avoid burns.
2. Add Twine for Hanging:
   • Attach twine around the screw ring to create a loop for hanging the ornament.
3. Assemble the Ornament:
   • Apply a thin line of hot glue along the inside of the screw ring.
   • Press the fabric-covered lid insert into the screw ring until secure.
4. Decorate the Ornament:
   • Use a small amount of hot glue to attach a Christmas-themed image, cutout, or sticker to the fabric-covered lid.
5. Finishing Touches:
   • Ensure all edges and glue clumps are hidden behind the screw ring for a polished look.

Get the tutorial (with detailed steps and images)

30. 10-Minute Photo Keepsake Ornament

Materials

• Round distressed wood ornaments
• Twine
• Matte Mod Podge
• Foam brushes
• Scissors
• Printed photos
• Photo editing program (e.g., Photoshop, Photoshop Elements, or PicMonkey)
• Hole punch

Instructions

1. Select Photos:
   • Choose meaningful photos (e.g., family memories or favorite trips).
   • Crop photos into circles using a photo editing program.
   • Optionally, add simple text (e.g., location and date).
2. Print Photos:
   • Arrange circular photos on a 4×6 canvas and save as a JPG.
   • Print at home or at a local photo lab.
3. Prepare Ornaments:
   • Use distressed round wood ornaments or paint plain ones white and distress them.
4. Cut and Align Photos:
   • Cut out the circular photos.
   • Mark and punch a hole at the top of each photo to align with the ornament’s hole.
5. Apply Mod Podge:
   • Apply a generous, even layer of Mod Podge to the top of the wood ornament.
   • Coat the back of the photo with Mod Podge and place it on the ornament, ensuring it’s centered.
   • Seal the photo with an even top layer of Mod Podge, keeping brush strokes uniform.
6. Assemble:
   • Allow Mod Podge to dry completely.
   • Thread twine through the ornament’s hole and tie a knot.
7. Display:
   • Hang the ornaments on your tree and enjoy your personalized keepsakes.

Get the tutorial (with detailed steps and images)

29. Snowman Lightbulb Ornament

Materials Needed:

• 4 lightbulbs (preferably white for vibrancy; old non-working bulbs can also be used)
• Craft Bond Spray Glue
• Tweed or string (to hang the lightbulb on the tree)
• White glitter
• Stick from the yard (for arms)
• Piece of paper (to catch glitter spills)
• Puffy paint, fabric paint, or similar (for decorating)
• Hot glue gun and glue sticks
• Beads or small decorations (for the face and buttons)
• Carrot-shaped nose (small, craft material)

Instructions:

1. Prepare the Lightbulb:
   • Spray the lightbulb with Craft Bond Spray Glue.
   • Roll or sprinkle white glitter over the glued surface.
   • Let it dry for a few minutes.
2. Attach the Hanging String:
   • Tie a piece of tweed or string around the bulb’s base.
   • Ensure it’s secure for hanging.
3. Add the Arms:
   • Break a stick into two small pieces for arms.
   • Attach the stick arms to the bulb with a hot glue gun.
4. Decorate the Snowman:
   • Use beads, puffy paint, or similar materials to create the face and buttons.
   • Allow any gel or paint to dry completely before handling.
5. Attach the Nose:
   • Glue a small carrot-shaped piece for the nose onto the face.
6. Repeat and Enjoy:
   • Repeat the process to make additional snowmen.
   • Hang your completed snowman ornaments and enjoy the festive look!

Get the tutorial (with detailed steps and images)

28. Felt Gingerbread House Ornament

Materials:

• Felt (colors and types as listed on the pattern)
• Embroidery floss: white, beige, red, and dark brown
• Tiny buttons for gumdrops (or use felt to cut small circles)
• Stiffened felt (for the main house; refer to a tutorial to stiffen felt yourself)
• Needle (sharp)
• Tape (for stiffened felt pieces to avoid pinholes)
• String (for hanging)

Instructions:

1. Prepare Felt:
   • Stiffen the felt for the main house as needed.
   • Cut out all pattern pieces using tape to secure them instead of pins.
2. Assemble the House:
   • Use a whip stitch to join the house pieces together.
3. Add Details:
   • Embroider and applique the details onto the outside of the house.
   • For accurate window placement, tape the template onto the house before stitching.
4. Attach Candy Cane Corners:
   • Whip stitch the white candy cane pieces to each corner of the house to join them.
5. Assemble Roof Base:
   • Fold the roof piece in half and crease it by bending it back and forth.
   • Cut out the shingle pieces.
6. Sew Shingles:
   • Attach shingles to the roof with a running stitch, slightly overlapping each row.
   • Ensure the bottom shingles hang off the edge slightly.
   • Keep stitches tidy by starting and stopping them between the roof and shingles.
7. Add Buttons (Gumdrops):
   • Sew buttons onto each scallop of the top shingle piece.
8. Hang the House:
   • Thread string through the bottom of the house, come up through the roof, and tie knots at both ends to secure.
9. Make Gingerbread People:
   • Cut two felt pieces for each gingerbread person.
   • Sew details onto the front layer, then stitch the back layer using a running stitch.
10. Personalize:
    • Optionally, create gingerbread people for each family member.

Get the tutorial (with detailed steps and images)

27. Easy DIY Gnomes

Materials:

• Dollar Store socks
• Bag of dried beans (e.g., lentils)
• Rubber bands
• Mongolian fur (or craft fur)
• Razor blade or utility knife
• Hot glue gun and glue sticks
• 1-inch wooden balls (or similar item for the nose)
• Fabric for the hat
• Scissors
• Optional embellishments: tiny pinecones, red berries, jingle bell

Instructions:

1. Create the Gnome Body:
   • Place dried beans in one sock.
   • Secure the top with a rubber band.
   • Trim off excess sock above the rubber band.
2. Prepare the Beard:
   • Wrap Mongolian fur around the sock to measure size.
   • Mark the dimensions with your fingers.
   • Flip the fur over and use a razor blade to cut only the backing into a U-shape.
   • Attach the fur to the sock using hot glue, starting in the center and working outward.
3. Add the Nose:
   • Separate the fur slightly to create space for the nose.
   • Apply a dab of hot glue to the chosen spot.
   • Press the wooden ball (or chosen nose material) into place.
4. Make the Hat:
   • Measure and cut fabric to the desired size, leaving enough for a pointy triangle shape if preferred.
   • Apply hot glue along one edge and fold the fabric to form a cone shape.
   • Turn the glued fabric inside-out to hide the seam.
   • Fold the rim of the hat inside for a neat edge.
5. Attach the Hat:
   • Place the hat on the gnome’s head and check the fit.
   • Secure the hat with small dabs of hot glue at the front, sides, and back.
   • Adjust the fur beneath the hat to create a mustache.
6. Embellish the Gnome:
   • Add decorations to the hat, such as tiny pinecones, red berries, or a jingle bell at the tip.

Get the tutorial (with detailed steps and images)

26. Scrabble Tile Ornament

Materials:

• Scrabble letters
• Low-temp hot glue gun
• Ribbon
• Twine
• Jingle bells (optional)

Instructions:

• Lay out a piece of ribbon, arranging Scrabble tiles to spell the name. Leave extra space at the top for a bow and folding.
• Hot glue the Scrabble tiles onto the ribbon.
• Attach a bow using hot glue.
• Create a loop with a piece of twine, threading it through the top of the ribbon.
• Fold over the ribbon at the top and glue it down.
• Optionally, glue a string of bells to the back or leave it plain.

Get the tutorial (with detailed steps and images)

25. Vintage Style Ornaments

Materials Needed

• Clear plastic ornaments (open in the front)
• Americana Multi-Surface Satin paint in Ballerina, Melonball, and Waterfront
• Pearl beads
• DecorArt Glamour Dust in Crystal
• Small bottle brush trees
• DecoArt Snow-Tex
• DecoArt Snow Writer
• Hot glue gun
• Palette knife or plastic knife

Instructions

Prepare the Bottle Brush Trees

• Use hot glue to attach pearl beads to the trees.
• Press beads between branches to ensure they don’t stick out excessively.

Paint the Ornaments and Pearls

• Apply Multi-Surface Satin paint to ornaments and pearls.
• Paint 4 coats on the ornaments for full coverage.
• Paint 2 coats on the pearls.

Attach Trees and Add Snow

• Hot glue the decorated bottle brush trees inside the plastic ornaments.
• Use a palette or plastic knife to apply Snow-Tex to the base of the tree and the bottom of the ornament.
• Sprinkle Glamour Dust over the wet Snow-Tex and press lightly to help it adhere.
• Shake the ornament gently to remove any excess glitter.

Decorate with Snow Writer

• Outline the ornament’s opening with the Snow Writer.
• Sprinkle Glamour Dust over the wet Snow Writer to add sparkle.
• Create vintage-inspired designs on the outside of the ornament using the Snow Writer.
• Work in small sections and sprinkle Glamour Dust before the Snow Writer dries.
• Once completely dry, brush off any excess glitter.

Get the tutorial (with detailed steps and images)

24. Grinch Ornament

Materials Needed

• Clear glass disk ornaments
• Polycrylic (water-based protective coat, high gloss or satin finish, available at hardware stores)
• Fine glitter (e.g., Recollections Glitter from Michaels)
• Small funnel
• Silicone squeeze bottle
• Paper cups or egg carton
• Rubbing alcohol
• Decal (cut using Silhouette Cameo 3 or similar cutting machine)
• Transfer tape

Instructions

• Prepare Polycrylic: Pour 2 ounces of polycrylic into the silicone squeeze bottle.
• Coat Ornament Interior:
  • Pour a small amount of polycrylic into the ornament.
  • Swirl to fully coat the inside.
  • Turn the ornament upside down and place it in a paper cup or egg carton to drain for about 1 minute.
• Add Glitter:
  • Use the funnel to pour fine glitter into the ornament.
  • Shake to ensure the glitter coats the inside completely.
  • Turn the ornament upside down and let it dry in a paper cup or egg carton for at least 1 hour (up to 24 hours).
• Create and Apply Decal:
  • Download the Grinch face design and cut it using Silhouette Studio.
  • Weed the decal and apply transfer tape. Burnish to ensure adhesion.
  • Clean the outside of the ornament with rubbing alcohol.
  • Apply the decal to the ornament.

Get the tutorial (with detailed steps and images)

23. Syrofoam Balls Snowman Ornament

Materials:

• 2 foam balls (one small and one medium-sized, white)
• 1 bag of fake snow
• Mod Podge
• 1 piece of ribbon
• Buttons
• Snowman accessories (e.g., hat, scarf, facial features)
• String or twine (for hanging)

Equipment:

• Hot glue gun
• Scissors
• Foam brush

Instructions:

1. Prepare the foam balls:
   • Coat each foam ball in Mod Podge using the foam brush.
   • Roll the balls in fake snow, ensuring full coverage.
   • Check for bald spots and reapply snow if needed. Let them dry completely.
   • (Optional) Spray adhesive can be used for extra hold.
2. Assemble the snowman:
   • Place the smaller foam ball on top of the medium-sized ball.
   • Use the hot glue gun to attach them securely.
   • (Optional) Insert a toothpick halfway into the bottom foam ball before adding glue for added stability.
3. Decorate:
   • Attach facial features, buttons, and accessories as desired.
   • Use hot glue for secure placement of items like ribbon or a hat.
   • Push in small details like eyes or nose if your accessories allow.
4. Add hanging string:
   • Glue a piece of twine or cord to the back of the snowman for hanging.

Get the tutorial (with detailed steps and images)

22. Wood Bead Snowmen

Materials:

• 1-inch unfinished wood beads (available on Amazon or at local craft stores)
• Natural-colored twine
• Red and white baker’s twine (optional, for a bow)
• Black marker or paint (for eyes and buttons)
• Orange marker or paint (for the nose)
• Glue (if needed to secure elements)

Instructions:

1. Prepare the Beads:
   • Use 1-inch unfinished wood beads as the base for the snowman.
   • Ensure the beads are clean and ready to use.
2. Assemble the Snowman:
   • Thread natural-colored twine through two or three wood beads to form the snowman body.
   • Tie the twine securely to hold the beads in place.
3. Add Features:
   • Draw or paint black dots for the eyes and buttons.
   • Add an orange dot for the nose.
4. Decorate:
   • Tie a red and white baker’s twine bow around the neck for added charm (optional).
5. Hang on Tree:
   • Use the remaining natural twine to create a loop for hanging.

Get the tutorial (with detailed steps and images)

21. Gnome Ornaments

Materials Needed:

• Wood slices (no drilling required)
• Mongolian fur fabric (or other craft fur)
• Craft felt
• Nose options: plastic/wooden beads, clay pieces, or buttons
• Twine or ribbon (about 10 inches)

Tools Required:

• Scissors
• Razor blade
• Hot glue gun and glue sticks

Instructions:

• Prepare the Twine/Ribbon Holder:
  • Tie the ends of the twine or ribbon into a knot and set aside.
• Cut the Beard and Mustache:
  • Use a razor blade to cut the faux fur around the wood slice, leaving a slight overlap.
  • Avoid cutting through the fur; only cut the backing.
  • Cut a small rectangular piece for the mustache and split it into two sections.
• Attach Beard, Mustache, and Nose:
  • Hot glue the beard to the wood slice.
  • Glue the mustache on top of the beard.
  • Attach the nose above the mustache.
• Make the Hat:
  • Wrap felt around the wood slice with a slight overlap.
  • Fold the felt in half, trim off excess, and shape it into a rounded triangle.
  • Glue the bottom edges of the felt together to form a cone.
• Attach the Twine Holder and Hat:
  • Glue the twine holder to the top of the felt cone.
  • Secure the cone shape with hot glue.
  • Slide the hat over the wood slice, positioning it to scrunch over the nose.
  • Hot glue the hat to the nose and secure it around the wood slice.
• Decorate and Finish:
  • Add decorations as desired to complete your Christmas gnome ornament.

Get the tutorial (with detailed steps and images)

20. Paper Bauble Ornaments

Materials:

• 12″ x 12″ scrapbook paper (one per ornament)
• Paper cutter
• Tape
• Hot glue and glue gun
• Twine
• Ribbon
• Scissors

Instructions:

• Cut Paper Strips:
  • From the 12″ x 12″ scrapbook paper, cut strips as follows:
    • 2 strips of 1″ x 12″
    • 4 strips of 1.25″ x 12″
    • 2 strips of 1.5″ x 12″
• Trim Strips:
  • Leave the 2 strips of 1″ x 12″ as they are.
  • Cut the 4 strips of 1.25″ x 12″ into 8 strips of 1.25″ x 8″.
  • Cut the 2 strips of 1.5″ x 12″ into 4 strips of 1.5″ x 10″.
• Tape Strips Together:
  • Tape corresponding strips together to create longer strips.
• Accordion Fold:
  • Fold each strip like an accordion with approximately 0.5″ wide folds.
• Glue Ends:
  • Use hot glue to glue the ends of each strip together, forming a closed circle.
• Form Medallions:
  • Push the circle inward to create a medallion. Add a drop of hot glue in the center to hold it in place.
• Assemble Sphere:
  • Repeat the process for all strips until you have five medallions.
  • Hot glue each medallion together to form a sphere.
• Add Hanger:
  • Cut a piece of twine or ribbon and hot glue it to the top of the ornament for hanging.
• Tie a Ribbon Bow:
  • Tie a decorative ribbon bow around the top of the ornament.

Get the tutorial (with detailed steps and images)

19. Plastic Spoon Tree Craft for Adults

Materials:

• Paper Mache Christmas Tree form
• Plastic spoons (approximately 100)
• Spray paint (in colors of your choice; suggested: two browns, chalkboard black, gold)
• Hot glue gun and glue sticks

Instructions:

1. Prepare the Spoons
   • Buy plastic spoons from a store (e.g., Target or Dollar Store).
   • Cut the tops off the spoons using scissors. Avoid breaking them as they may split.
2. Paint the Spoons
   • Lay the spoon tops face down on paper outdoors.
   • Spray them with a variety of spray paints to create texture and color variation.
   • Practice on the back side to perfect your technique before painting the front.
3. Attach to the Tree Form
   • Begin gluing the painted spoon tops onto the paper mache form with hot glue.
   • Start at the bottom and work upward.
   • Alternate the spacing and positioning of spoons on each layer for a staggered effect.
4. Finish
   • Continue layering and gluing until the entire tree form is covered.
   • Let it dry completely.

Get the tutorial (with detailed steps and images)

18. 3D Pasta Noodle Tree

Materials:

• Thick cardstock paper or thin cardboard
• Hot glue gun
• 1 box of shell or bow tie noodles (bow tie noodles for the star)
• Glitter
• Spray paint or acrylic paint

Instructions:

• Roll the cardstock paper into a cone and secure it with hot glue.
• Apply a strip of hot glue around the bottom edge of the cone and attach noodles. Repeat, working upwards until the cone is covered.
• Glue a bow tie noodle at the top of the cone to represent the star.
• Once dry, spray paint or hand paint the noodles with acrylic paint.
• While the paint is still wet, sprinkle glitter over the tree and let it dry.

Get the tutorial (with detailed steps and images)

17. Nordic Sweater Tree

Materials Needed:

• Foam florist cone
• Wide ribbon (e.g., Nordic print ribbon or a style of your choice)
• Hot glue gun and glue sticks
• Fabric scissors
• Small piece of cardboard
• Star cookie cutter
• Pen or pencil
• Toothpick

Instructions:

1. Cut Ribbon:
   • Cut a 5-inch length of ribbon using fabric scissors.
   • Divide this length into three equal parts.
2. Create Loops:
   • Take one piece of the cut ribbon.
   • Fold it over with the decorative side facing outward to form a loop.
3. Attach Ribbon to Foam Cone:
   • Start near the base of the foam cone, about 1-2 inches from the bottom.
   • Apply a small amount of hot glue to the top of the ribbon loop and press it onto the cone.
   • Use a little glue between the two ends of the loop for better adhesion.
4. Repeat Process:
   • Continue creating and attaching ribbon loops, working your way around the base of the cone.
   • Move up to the next layer once the base is complete, repeating until the cone is fully covered.
5. Create and Attach Star:
   • Use a star-shaped cookie cutter to trace a star onto a piece of cardboard.
   • Cut out the star.
   • Insert a toothpick into the bottom of the cardboard star and stick it into the top of the foam cone.

Get the tutorial (with detailed steps and images)

16. Glass Beaded Tree Craft for Adults

Materials

• Poster Board: To create cones of varying sizes.
• Glass Beads (15–16 ounces total):
  • Bugle beads
  • Cut beads
  • Seed beads (silver and iridescent)
• Mod Podge: Adhesive for securing beads.
• Foam Brush: For applying Mod Podge (ensure it applies a thick coat).
• Pyrex Cup: To mix and hold beads.
• Sealer Spray: To prevent bead loss after curing.
• Extra Supplies: A flat surface for crafting, scissors, and a large piece of poster board to catch excess beads.

Instructions

1. Make the Cones:
   • Create cones of varying heights using poster board.
   • The cones don’t need to be perfect, as they will be covered with beads.
2. Prepare Beads:
   • Mix bugle beads, cut beads, and seed beads in a Pyrex cup.
3. Apply Mod Podge:
   • Use a foam brush to apply a thick coat of Mod Podge onto the cone surface.
4. Add Beads:
   • Hold the cone over a large piece of poster board.
   • Shake the mixed beads gently over the cone, turning it to ensure full coverage.
   • Cover the top of the cone first and allow it to dry.
   • Once dry, repeat the process for the bottom half.
5. Reuse Excess Beads:
   • Shake the excess beads collected on the poster board back into the Pyrex cup for reuse.
6. Seal the Beads:
   • After the Mod Podge has fully cured (about 24 hours), spray the cones with a sealer spray to secure the beads and minimize bead loss.

Get the tutorial (with detailed steps and images)

15. How to Make a String Tree

Materials

• Cone (Styrofoam, Paper Mache, or Homemade)
• Plastic wrap
• Crochet thread
• Mod Podge
• Sponge applicator brush
• Adhesive gem rhinestones (optional)

Instructions

• Wrap the cone in plastic wrap.
• Make a small slipknot in the crochet thread and slip it over the top of the cone.
• Wind the crochet thread around the cone, starting at the top.
• Apply Mod Podge with the sponge applicator brush on the wrapped thread to hold it in place.
• Continue wrapping the thread around the cone in random patterns, applying Mod Podge as you go.
• Wrap extra thread around the base to create a sturdy foundation for the tree.
• When the desired coverage is achieved, cut the thread and secure the end with Mod Podge.
• Dab Mod Podge over the entire cone for added stiffness.
• Let the cone dry for several hours or overnight.
• Remove the string tree from the cone by gently wiggling and twisting it to release it from the plastic wrap.
• Decorate the tree with adhesive rhinestones if desired.

Get the tutorial (with detailed steps and images)

14. Mini Christmas Tree

Materials

• Foam cone
• 2 packs of wired garland ties
• Ruler
• Scissors
• Green acrylic paint (available for $0.50 at Walmart)
• Optional decorations: mini Christmas bows, tiny ornaments (bells, gem stickers, pom-poms), battery-operated LED lights

Instructions

• Paint the cone: Paint the foam cone green and let it dry.
• Prepare garland ties: Cut garland ties into pieces of the following lengths: 0.5 inch, 1 inch, 1.5 inches, 2 inches, 2.5 inches, 3 inches, and 3.5 inches. Work over a trash bag for easy cleanup.
• Attach garland ties:
  • Start at the top of the foam cone.
  • Insert 0.5-inch garland pieces at a downward angle to cover the top rows without gaps.
  • Gradually use longer pieces for subsequent rows (1 inch, 1.5 inches, etc.), ensuring each row is slightly longer than the previous one.
  • Finish with 3.5-inch pieces for the bottom row.
• Top the tree: Insert a 1-inch garland tie vertically at the top center and surround it with 0.5-inch pieces.
• Decorate: Add your chosen decorations (bows, ornaments, LED lights, etc.).
• Display: Use a red doily as a tree skirt, faux snow, and small foam Christmas gifts for a festive setup.

Get the tutorial (with detailed steps and images)

13. Twine Trees Tutorial

Materials

For the Tree:

• Cardboard
• Styrofoam
• Poster board
• Painter’s tape

For the Trunk:

• Stick
• Popsicle stick
• Dowel rod
• Paint stirrer

For the Base:

• Cut piece of log/branch
• Scrap of wood

Additional:

• Twine or rope
• Hot glue gun
• Star anise (optional, for topping)

Instructions

1. Gather Materials
   Collect all the materials listed above based on your design preference.
2. Create Tree Shape
   • Trace a triangle shape on your chosen material (cardboard, foam, or poster board).
   • Cut out the triangle.
3. Wrap with Twine
   • Start at the bottom of the triangle and glue the twine in place using a hot glue gun.
   • Continue wrapping and gluing until the entire tree is covered.
4. Prepare the Trunk
   • Choose your trunk material (stick, dowel, etc.).
   • Whittle one end to a sharp point using a knife.
5. Attach Trunk to Tree
   • Insert the sharpened end of the trunk into the bottom of the tree.
   • Secure it with glue if needed.
6. Prepare the Base
   • Drill a hole in the center of your chosen base material (wood or log slice).
   • Ensure the hole is large enough to fit the trunk snugly.
7. Assemble Tree
   • Insert the trunk into the base.
   • Secure it with glue for added stability.
8. Add Finishing Touches
   • Place a star anise at the top of the tree for decoration (optional).

Get the tutorial (with detailed steps and images)

12. Dollar Tree Duster Trees

Materials Needed:

• Duster with handle
• Scissors
• Hot glue (optional, for removing handle)
• Battery-operated LED fairy lights
• Mounting base options:
  • Small wood box (e.g., Dollar Tree)
  • Floral foam
  • Log slices
• Drill (if using log slices)

Instructions:

1. Fluff the Duster:
   • Spin the duster back and forth in your hands to fluff up the strands until they stand on end.
2. Trim the Duster:
   • Start trimming the duster from the top middle, angling out toward the edges about 3/4 of the way down.
   • Keep trimming until the shape resembles a tree, spinning the duster occasionally to ensure even trimming.
3. Remove the Handle:
   • Twist the handle in the unscrewing direction to break the glue bond and detach it from the wire stem.
4. Add Lights:
   • Wrap a strand of battery-operated LED fairy lights around the duster tree, starting from the top and working downward.
   • Nestle the lights into the fluff to hide the wires.
5. Mount the Tree:
   • Option 1: Using a Wood Box and Floral Foam
     • Place floral foam into a small wood box.
     • Insert the tree’s wire base into the floral foam.
     • Tuck the fairy light controller into the box.
   • Option 2: Using Log Slices
     • Drill a hole in a log slice large enough to fit the tree’s wire (do not drill all the way through).
     • Insert the tree into the drilled hole. Stack additional log slices for a layered display if desired.
6. Display:
   • Choose your preferred base (wood box or log slices).
   • Light up your tree with the LED lights for a festive effect.

Get the tutorial (with detailed steps and images)

11. Wine Glass Snowmen Craft for Adults

Materials

• Wine glass
• Epsom salt
• Mod Podge
• Acrylic paint or buttons
• Scarf or fabric
• Snowman hat ornament
• 2 paintbrushes
• E6000 glue

Instructions

• Apply an even coat of Mod Podge inside the wine glass using a paintbrush. Sprinkle Epsom salt to coat, then shake off the excess.
• Cover the bottom of the wine glass with Mod Podge, sprinkle Epsom salt, and let it dry.
• Paint a face on the wine glass or glue on buttons for decoration.
• Remove the string from the snowman hat ornament. Apply a strip of E6000 glue around the rim of the wine glass and attach the hat.
• Cut a strip of fabric for the scarf, tie it around the wine glass in a bow, and secure it with a dab of glue if needed.

Get the tutorial (with detailed steps and images)

10. Paper Star Garland

Materials

• Paper
• Star punches
• Twine
• Glue
• Paintbrush

Instructions

• Use the star punches to cut stars out of the paper.
• Lay a piece of twine on your working surface.
• Decide on a pattern if using different paper designs or star sizes.
• Apply glue to the back of a paper star using the paintbrush.
• Place the twine on the glued side of the star.
• Apply glue to another star and sandwich the twine between the two glued sides, aligning the star shapes.
• Repeat the process until the garland reaches your desired length.

Get the tutorial (with detailed steps and images)

9. Snowy Bottles

Materials:

• 3 wine bottles (1 taller than the other 2)
• Primer spray paint
• Craft bond spray adhesive
• Epsom salt (available in the drug section, near first aid)
• Silver platter or any decorative tray
• Silver decorative balls
• 3 votive candles
• Silver picks (from Michael’s or similar craft store)

Instructions:

1. Prepare the Bottles:
   • Gather 3 wine bottles, ensuring one is slightly taller for variation.
   • Spray a coat of primer on the bottles and let them dry completely.
2. Add Epsom Salt Texture:
   • Spray each bottle with craft bond spray adhesive.
   • Roll the tacky bottles in Epsom salt until they are evenly coated. The texture will resemble snow.
3. Assemble the Display:
   • Place the bottles on a silver platter or decorative tray.
   • Sprinkle additional Epsom salt around the base for a snowy effect.
   • Add small silver balls and 3 votive candles around the bottles.
4. Decorate the Bottles:
   • Insert silver picks into the bottle openings. Alternatively, use tall candles for a different look.

Get the tutorial (with detailed steps and images)

8. Peppermint Bowls

Materials:

• 19 Peppermint Starlight Mints (per bowl)
• Silicon baking liner or parchment paper
• Baking sheet
• Small glass bowl (for molding the candy bowl)
• Oven mitts

Instructions:

1. Preheat Oven: Set the oven to 300°F (150°C).
2. Prepare Baking Sheet: Place a silicon baking liner or parchment paper on a baking sheet.
3. Arrange Mints:
   • Place one mint in the center of the liner.
   • Surround it with six mints, forming a flower shape. Ensure the mints touch with minimal gaps.
   • Use the remaining 12 mints to create a larger circle around the center mints.
4. Melt Mints:
   • Place the sheet in the oven and monitor closely.
   • Bake for about 8 minutes or until the mints become shiny and start to melt. Avoid over-melting to the point of bubbling.
5. Prepare to Mold:
   • Place a small glass bowl upside down to use as a mold.
   • Remove the mints from the oven and let them cool for about 30 seconds until they are safe to handle but still pliable.
6. Shape the Bowl:
   • Carefully flip the silicon liner with the melted mints over the upside-down glass bowl, centering the mints.
   • Using oven mitts, gently press the melted mints around the bowl to shape them. Work quickly as the mints harden in under a minute.
7. Cool and Finish:
   • Let the candy bowl cool completely on the glass bowl.
   • Remove the candy bowl from the glass mold once fully set.
8. Enjoy: Fill with your favorite holiday treats!

Get the tutorial (with detailed steps and images)

7. Lighted Burlap Garland

Materials Needed

• Clear 100 white mini lights
• Burlap ribbon in natural, red, and green (approximately 30 feet of each color)
• Scissors

Instructions

• Cut the burlap into 8-10 inch pieces.
• Split each piece vertically down the middle to make the strips narrower.
• Decide on a color pattern for the burlap strips.
• Tie the burlap strips onto the light wire in the chosen pattern.
  • Use a single knot or double knot (if double knotting, cut longer strips than 8-10 inches).
• Repeat the process until the garland is fully covered.
• Relax, enjoy a movie or show while working.

Get the tutorial (with detailed steps and images)

6. Plastic Pumpkin Snowman Craft for Adults

Materials:

• 3 plastic pumpkin buckets
• White spray paint (or white acrylic paint and paintbrush)
• Plastic black hat
• Hot glue gun
• 2 sticks
• Scarf
• 3 black buttons
• Acrylic paint and paintbrush

Instructions:

• Remove the handles from the pumpkin buckets.
• Turn the pumpkins so their faces face backward.
• Use hot glue around the rim of one pumpkin’s opening and stack another on top. Repeat to stack all three pumpkins.
• Spray paint the stacked pumpkins white (or use white acrylic paint with a brush) and let them dry.
• Hot glue the sticks on the sides as arms.
• Attach the three black buttons down the center pumpkin with hot glue.
• Glue the plastic black hat on top.
• Paint the snowman’s face with acrylic paint using a small brush.
• Add a colorful scarf around the neck area and optionally hot glue a fake cardinal bird on one of the sticks.

Get the tutorial (with detailed steps and images)

5. Let it Snow Christmas Wreath

Materials

• Foam Wreath Form: 18″ FloraCraft Make it Fun Foam Wreath
• Plaid Fabric Strips (or plaid ribbon)
• White Yarn: Baby Braid Fringe Yarn
• Bottle Brush Trees
• Wood Slice Rounds
• Straight Pins
• Black Sharpie Marker
• Fabric Scissors
• Hot Glue Gun

Instructions

1. Prepare the Fabric
   • Cut plaid fabric into strips long enough to wrap fully around the wreath. Alternatively, use plaid ribbon.
2. Wrap the Wreath
   • Attach the plaid fabric strips to the foam wreath by wrapping them around and securing the ends at the back with straight pins.
   • Cover approximately 2/3 of the wreath with plaid fabric.
3. Add Fringe Yarn
   • Wrap the remaining 1/3 of the wreath with white fringe yarn to create a snowy texture.
   • Secure the yarn by tying it at the back.
4. Attach Trees
   • Use a hot glue gun to attach bottle brush trees to the wreath.
5. Create and Attach Wood Slices
   • Write “Let it Snow” on wood slice rounds using a black Sharpie. Use hand lettering for a decorative touch.
   • Glue the decorated wood slices to the wreath.
6. Final Touch
   • Allow glue to dry, and your holiday wreath is ready!

Get the tutorial (with detailed steps and images)

4. Dollar Store Fishbowls Snowman

Materials:

• 3 different-sized stackable fish bowls (available at craft stores or dollar stores)
• Snow village decorations
• 1 bag of fake snow
• 2 sheets of black craft foam
• Scissors
• Christmas ribbon (for the snowman’s top hat)
• Glue gun
• Flameless candle (optional)

Instructions:

• Stack the three fish bowls with the largest on the bottom and the smallest on top.
• Fill each bowl with fake snow and arrange snow village decorations inside to create unique scenes.
• Place a flameless candle inside a small house decoration (if available) for added warmth and ambiance.
• Cut black craft foam into shapes to form the snowman’s top hat.
• Secure the hat with a glue gun and decorate it with Christmas ribbon.
• Adjust decorations and light placement as desired to complete your fish bowl snowman.

Get the tutorial (with detailed steps and images)

3. North Pole Street Light

Materials Needed:

• Solar path light: $2.50 and up
• Foam circle: $1
• Fake snow: $1 and up (loose snow or fabric snow like Christmas village sheets or tree skirts)
• Popsicle sticks: On hand or $1
• Chain necklace: On hand or $1 (use short sections or broken costume jewelry)
• Paper shapes: On hand or $1 (e.g., scrapbook paper or pre-cut shapes)
• Paint: On hand or $1 and up
• Glue: On hand

Instructions:

1. Prepare the Base:
   • Cover the foam circle with fake snow using glue.
   • If using fabric snow, cut a hole in the fabric where the path light will be inserted.
2. Create the North Pole Sign:
   • Write “North Pole” on two paper shapes (use pre-cut shapes or make your own).
   • Cut two short sections of chain (about 2.5 inches each). Ensure both are the same length for a straight-hanging sign.
   • Form loops at one end of each chain by opening an end link and securing it to a link farther up the chain. Make the loops large enough to slide over a popsicle stick.
3. Assemble the Sign:
   • Lay one paper sign face down and place the unlooped chain ends at the top of the sign.
   • Apply glue to the back of the sign and layer the second sign on top, sandwiching the chain ends in between.
4. Make the Sign Bracket:
   • Cut two popsicle sticks to create a bracket slightly larger than the sign in each direction.
   • Glue the popsicle sticks together at a right angle.
   • Paint the bracket and let it dry.
5. Attach the Bracket to the Path Light:
   • Glue the painted bracket to the shaft of the solar path light at the top.
6. Assemble the Final Piece:
   • Insert the bottom of the solar path light into the snow-covered foam base. Add glue for extra stability, if needed.
   • Slide the chain loops over the popsicle stick bracket to hang the sign.
   • Optionally, add a dab of glue where the chain rests on the bracket for added security.

Get the tutorial (with detailed steps and images)

2. Pom Pom Winter Wreath

Materials:

• Pom Pom Maker
• Medium weight cream yarn (2-3 skeins)
• Scissors
• Foam wreath form (16″)
• White felt sheets (3-4 sheets, 8″x10″ each)
• Bottlebrush trees
• Vintage Putz house
• Ribbon
• Hot glue gun and glue sticks

Instructions:

• Step 1: Cover Foam Wreath Form
  • Cut white felt to fit the wreath form.
  • Cover the top, bottom, and sides with felt using hot glue.
  • Add a small felt loop to the back for hanging.
• Step 2: Make Yarn Pom Poms
  • Use the pom pom maker to create pom poms (each takes 2-3 minutes).
  • Prepare around 41 pom poms for a 16″ wreath form.
  • Refer to a pom pom tutorial if needed.
• Step 3: Attach Pom Poms
  • Use hot glue to secure pom poms to the wreath form.
  • Start with the flat front, then cover the inside and outside edges.
  • Aim for 3 rows of pom poms for full coverage.
• Step 4: Decorate
  • Attach bottlebrush trees and a vintage-inspired Putz house with hot glue.
  • Finish with a satin ribbon for a polished look.

Get the tutorial (with detailed steps and images)

1. No-Sew Sock Snowman Craft

Materials

• 1 white sock
• 1 colored sock (for the hat)
• Rice
• Rubber bands or thread
• Colorful buttons
• Ribbons
• Glue gun (or glue dots)
• Markers or paint
• Orange pom-poms

Instructions

1. Fill the Sock:
   • Fill the white sock with rice until you achieve the desired size for your snowman.
   • Secure the top of the sock with a rubber band.
2. Shape the Snowman:
   • Use another rubber band to divide the sock into two sections, creating a head and body. Place the band closer to the top for a proportionate head.
3. Decorate the Body:
   • Glue colorful buttons to the body using a glue gun or glue dots.
4. Add Facial Features:
   • Draw eyes and a mouth with a black marker or paint.
   • Create rosy cheeks with pink paint (e.g., Crayola washable paints).
   • Attach two orange pom-poms to form the nose.
5. Make the Scarf:
   • Tie a ribbon around the neck area as a scarf.
   • Secure the ribbon with a glue gun or glue dots for better hold.
6. Create the Hat:
   • Cut the foot section (without the heel) of the colored sock.
   • Roll the cut edge slightly and place it on the snowman’s head as a hat.
   • Optionally, secure the hat with glue for a firmer hold.

Get the tutorial (with detailed steps and images)